Skip to content 
The DRYICEJET D20 Pro is a wheeled dry ice blasting machine for industrial cleaning tasks that require adjustable cleaning intensity. It combines a 20 kg hopper, a stainless steel body and an accessible control panel in a mobile unit.
The upgraded dual-mode configuration supports standard-pellet cleaning for heavier contamination and fine-particle cleaning for tasks requiring more controlled treatment. Cleaning settings and nozzle selection should be matched to the workpiece, contamination and available compressed air.
Dual-mode switching is available only on the upgraded configuration. Confirm the supplied configuration and included accessories in your quotation.
Request a D20 Pro Configuration & QuoteEmail: johanna@dryicejet.com
WhatsApp: +86 181 5550 9290
| Model | D20 Pro |
|---|---|
| Hopper capacity | 20 kg |
| Dimensions (L x W x H) | 478 x 740 x 810 mm |
| Machine weight | 77 kg |
| Dry ice consumption | 0-2 kg/min |
| Air consumption | 1.4-2.8 m³/min |
| Blasting pressure | 1.4-17.2 bar |
| Minimum blasting pressure | 1.4 bar, with pressure regulator |
| Air connection | 1-inch quick connector |
| Power supply | 220 V / 50 Hz |
| Heavy-duty cleaning medium | Standard 3 mm dry ice pellets |
| Dual-mode switching | Upgraded configuration only |
Published operating ranges are not a guarantee of simultaneous maximum pressure and flow. Air-supply requirements depend on the nozzle and operating settings. Confirm air pressure, available flow and electrical compatibility before ordering.
Adjustable blasting pressure helps the operator select settings for the workpiece and residue. A trial on a representative area is recommended before committing to a cleaning process, particularly for sensitive surfaces or coatings.
The upgraded configuration combines heavy-duty cleaning using standard 3 mm dry ice pellets with a fine-cleaning mode. Internal pellet pretreatment produces smaller particles for use with a matching nozzle. Select the configuration according to the cleaning task and workpiece.
The hopper holds up to 20 kg of dry ice. Wheels support movement between workstations. At 77 kg, the D20 Pro is a wheeled industrial machine, not a handheld device. Refilling frequency depends on actual dry ice consumption and operating conditions.
The stainless steel body and removable construction are practical features for industrial use and routine maintenance. An integrated filtration system is included; confirm the required inlet-air treatment for your installation.
Round and flat nozzle configurations are described for the equipment. Additional nozzle options and custom configurations can be discussed for access constraints or particular cleaning requirements. The quotation will identify the accessories included.
No. Dual-mode switching applies only to the upgraded configuration. Specify whether you need heavy-duty pellet cleaning, fine-particle cleaning, or both when requesting a quotation.
The published air-consumption range is 1.4-2.8 m³/min and the blasting-pressure range is 1.4-17.2 bar. Send the compressor’s available flow at your operating pressure, air-treatment setup and intended nozzle requirements so that compatibility can be checked. Compressor motor power alone is not enough to confirm suitability.
Share the mold or machine material, residue type, access constraints and photographs of the work area. A representative cleaning trial is the appropriate way to confirm removal performance and surface compatibility. Suitability is not guaranteed for every material or coating.
Request a quotation for the required configuration, nozzles, quantity and destination. The quotation should distinguish the equipment, accessories and shipping terms.
Send the following information to DRYICEJET so that the quotation matches your actual cleaning requirements:
Request a D20 Pro Configuration & Quote
Compare dry ice blasting equipment or review the industrial equipment quotation checklist.
D20 Lite uses 3 mm pellets; D20 Pro offers an upgraded dual-mode configuration. D10 Lite is block-fed for fine-cleaning evaluation; D10 Auto is a robot-based integration platform. Confirm application fit and supplied configuration before ordering.
Reach out now! We will contact you within 12 hours
Optimized by Seraphinite Accelerator