Skip to content 
The DRYICEJET D10 Lite is a block-fed dry ice cleaning machine for light-duty and precision-cleaning evaluation. It shaves high-density dry ice blocks into smaller particles before delivery through a dedicated cleaning gun.
The machine is supplied in a trolley-based configuration with a 9.8 kg hopper. Precision molds and electronic components are potential application areas, subject to material, contamination, electrical-safety and process validation. Fine-particle cleaning does not by itself guarantee damage-free results.
This is a trolley-mounted industrial system, not a handheld machine. Working pressure is listed as 3.0-9.7 bar; the separate 1.4 bar minimum with a regulator should be confirmed for the intended setup.
Request a D10 Lite Configuration & QuoteEmail: johanna@dryicejet.com
WhatsApp: +86 181 5550 9290
| Model | D10 Lite |
|---|---|
| Hopper capacity | 9.8 kg |
| Listed dimensions (L x W x H) | 755 x 440 x 450 mm; confirm overall trolley envelope |
| Listed total weight | 96 kg, including 29 kg trolley |
| Dry ice feed | High-density dry ice blocks |
| Dry ice consumption | 0-0.4 kg/min |
| Air consumption | 0.7-1.4 m³/min |
| Working blasting pressure | 3.0-9.7 bar |
| Minimum pressure with regulator | 1.4 bar; confirm nozzle and configuration |
| Air connection | 1/2-inch quick connector |
| Power supply | 220 V / 50 Hz |
| Handling arrangement | Dedicated support trolley |
| Cleaning gun | Fine-cleaning round-bore gun; additional configurations on request |
Operating ranges do not guarantee simultaneous maximum pressure and flow. Air requirements depend on the nozzle and operating settings. Confirm utilities, configuration, accessories and installation dimensions before ordering.
The internal shaving process prepares smaller dry ice particles from block feedstock. Confirm acceptable block dimensions and feedstock quality before arranging dry ice supply.
Adjustable cleaning intensity and a dedicated gun support trials on precision parts. Test representative materials and residues, particularly for electronics, finishes and small mold features.
The dedicated trolley supports movement around a suitable work area. The published weight includes the trolley; verify aisle space, lifting needs and the complete installed footprint.
Integrated precision filtration and removable construction are described for the equipment. Confirm upstream compressed-air quality requirements and maintenance intervals for the installation.
Round-bore, alternative and custom nozzle configurations can be discussed around access and cleaning targets. Included accessories must be identified in the final quotation.
The described feedstock is high-density dry ice blocks. Pellet compatibility is not confirmed; do not substitute feedstock without checking the supplied configuration.
An overall trolley envelope is not established in the available dimensions. Request an installation drawing before planning transport, bench space or production-area access.
No. Suitability depends on the assembly, contamination, moisture control, static sensitivity and cleaning settings. Use an approved procedure and representative validation before production use.
Send the workpiece material, residue, photographs, available air pressure and flow, required cleaning frequency, electrical supply, quantity and destination country. For automation, include the target cycle time and line-interface requirements.
Request a D10 Lite Configuration & Quote
Compare dry ice blasting equipment or review the industrial equipment quotation checklist.
D20 Lite uses 3 mm pellets; D20 Pro offers an upgraded dual-mode configuration. D10 Lite is block-fed for fine-cleaning evaluation; D10 Auto is a robot-based integration platform. Confirm application fit and supplied configuration before ordering.
Reach out now! We will contact you within 12 hours
Optimized by Seraphinite Accelerator