Skip to content 
The DRYICEJET D20 Lite is a dry ice blasting machine using standard 3 mm dry ice pellets. Its 20 kg hopper, adjustable cleaning pressure and 52 kg main unit suit buyers evaluating mobile equipment for industrial cleaning without adding a water-based cleaning medium.
A single-hose feed arrangement distributes pellets into the cleaning stream. Handgrip, foot-pedal and external-signal control options can be discussed for the intended workstation; the quotation should identify the selected controls and included accessories.
The published working range is 3.0-9.7 bar. A separate minimum setting of 1.4 bar is specified with a pressure regulator; confirm the usable range for your nozzle and configuration.
Request a D20 Lite Configuration & QuoteEmail: johanna@dryicejet.com
WhatsApp: +86 181 5550 9290
| Model | D20 Lite |
|---|---|
| Hopper capacity | 20 kg |
| Dimensions (L x W x H) | 560 x 450 x 800 mm |
| Weight | 52 kg, main unit |
| Rated electrical power | 600 W |
| Dry ice feed | Standard 3 mm dry ice pellets |
| Dry ice consumption | 0-2 kg/min |
| Air consumption | 0.7-1.4 m³/min |
| Working blasting pressure | 3.0-9.7 bar |
| Minimum pressure with regulator | 1.4 bar; confirm nozzle and configuration |
| Air connection | 3/4-inch quick connector |
| Power supply | 220 V / 50 Hz |
| Control options | Handgrip, foot pedal or external signal; confirm supplied configuration |
Operating ranges do not guarantee simultaneous maximum pressure and flow. Air requirements depend on the nozzle and operating settings. Confirm utilities, configuration, accessories and installation dimensions before ordering.
Uses granular dry ice rather than requiring block shaving. Confirm pellet supply, storage and refill arrangements for the expected duty cycle.
The hopper capacity provides a basis for planning refills. Actual run time depends on feed settings, cleaning interruptions and dry ice condition; continuous operation is not guaranteed.
Pressure and dry ice feed can be matched to the residue and workpiece. A representative cleaning trial is needed before use on sensitive materials, coatings or finished surfaces.
Stainless steel body components, a straightforward control panel and removable construction support industrial operation and maintenance access.
Choose the operating controls and nozzle geometry around access, operator position and integration needs. External-signal control is an option to confirm, not a promise of compatibility with every production line.
The D20 Lite uses 3 mm dry ice pellets. For a block-fed fine-cleaning configuration, compare the D10 Lite.
No single combination should be assumed. Specify handgrip, foot-pedal or external-signal requirements and confirm the included controls in the quotation.
Both have a 20 kg hopper. D20 Lite lists a 52 kg main unit and 3.0-9.7 bar working pressure; D20 Pro lists 77 kg and 1.4-17.2 bar. The Pro dual-mode feature is limited to the upgraded configuration. Select by cleaning trials and utility compatibility, not the model name alone.
Send the workpiece material, residue, photographs, available air pressure and flow, required cleaning frequency, electrical supply, quantity and destination country. For automation, include the target cycle time and line-interface requirements.
Request a D20 Lite Configuration & Quote
Compare dry ice blasting equipment or review the industrial equipment quotation checklist.
D20 Lite uses 3 mm pellets; D20 Pro offers an upgraded dual-mode configuration. D10 Lite is block-fed for fine-cleaning evaluation; D10 Auto is a robot-based integration platform. Confirm application fit and supplied configuration before ordering.
Reach out now! We will contact you within 12 hours
Optimized by Seraphinite Accelerator